1. It is possible to dry to a low moisture content since retention time is long.
2. Homogeneous product quality is obtained because retention time remains sharp, and mass flow is retained.
3. Switching of types of products is easy since perfect discharging is possible.
4. Absence of internal moving parts makes maintenance easy.

Material - Product

The material under treatment, charged through the material inlet, fills the inside of the machine, falls by gravity flow, and is discharged through the product outlet.

Internal structure

The machine has a straight cylindrical shell, with the bottom part built in the shape of an inverted cone. An upper internal cone and insert cone are arranged at the upper part, and a bottom cone and lower insert cone at the lower part for the purpose of supplying hot blast in an evenly distributed manner.
The insert cone has functions to correct the mass flow disrupted by the internal cone and bottom cone.

Treated material	Treated quantity ton/h	Retention-time hr	Principal dimensions mm	Capacity m3
Polypropylene powder	10	1	Φ3400×7000H	33
Polypropylene pellet	3.75	9	Φ4200×20000H	240
Polyacetal pellet	1	3	Φ1350×3700H	5.7
Polyvinyl alcohol pellet	0.5	50	Φ2400×8800H	23
Polypropylene powder	6	1	Φ2650×7400H	38
Polyacetal pellet	3.6	3	Φ2200×8100H	18
Polyacetal pellet	3.6	3	Φ2080×6500H	17
Polypropylene powder	8	2	Φ3000×8900H	55
Polystyrene powder	5	1	Φ4350/2500×7000H	200
Polyvinyl alcohol pellet	1.4	40	Φ3500×16000H	90